"Full Description:\nJBL RALLYBAR S is a IP66 rated water resistant Bluetooth® Soundbar with 150Wrms amplifier.\n\nFeatures:\n\u003cul>\n\u003cli>150Wrms Class-D Amplifier Built-in: The 150Wrms (THD <1%) Class- D amplifier ensures powerful, high quality JBL Original Pro Sound when you take the wheel or helm.\u003c/li>\n\u003cli>IP66 Rated Water and dust Resistant: IP66 rated water resistant protects soundbar speakers from dust ingress and powerful water jets.\u003c/li>\n\u003cli>Support Broadcast Mode: Broadcast Mode allows RALLYBAR S connect to multiple RALLYBAR S or RALLYBAR S family products (RALLYBAR, RALLYBAR S and RALLYBAR XL), allowing each soundbar to play the same audio source.\u003c/li>\n\u003cli>Support Party Mode: Party Mode provides simultaneous connection of up to two Bluetooth® devices—while playing music from one device at a time.\u003c/li>\n\u003cli>JBL Pro Sound: With HI-RESOLUTION Audio on wired audio sources, JBL Original Pro sound tuning, and DSP delivers extraordinary sound performance.\u003c/li>\n\u003cli>Innovative Mounting Kits Design: The innovative mounting kits design (patent pending), offers multiple position combinations on top and back to accommodate a variety of installation requirements.\u003c/li>\n\u003cli>Music Remote Control by JBL Click: When user’s smartphone connected to the JBL RALLYBAR S and a JBL Click Bluetooth controller (sold separately on JBL Website), you can use the JBL Click to control the music from your smartphone including “play/pause”, “next track”,” volume up/down”.\u003c/li>\n\u003cli>Support Bluetooth, USB Disk and 3.5mm Auxillary Input Audio Source Play: RALLYBAR S can detect the audio source automatically according to the source priority definition: USB disk >Bluetooth®> AUX-IN audio source. Higher priority source can break-in Lower priority audio source.\u003c/li>\n\u003cli>Variable AUX-OUT: 3.5mm auxiliary output (2V) can connect with external powered speakers and subwoofers, which can have changes of volume down/volume up/ play or pause according to Soundbar’s adjustment. The Line output is covered by a waterproof connector.\u003c/li>\n\u003cli>3 Different Gain Settings: RALLYBAR S Offers 3 different Gain settings when connected by Aux-in audio:2V, 4V, and 6V.\u003c/li>\n\u003c/ul>\n\nSpecifications:\n\u003cul>\n\u003cli>Transducers: 4x 2.75”(70mm) woofers, 2x 1”(25mm) tweeters, 2x 7.2”(182.8mm) x3”(76.2mm) Racetrack Passive Radiators\u003c/li>\n\u003cli>Output Power: 150WRMS, 300W PEAK (IEC60268)\u003c/li>\n\u003cli>THD at Rated RMS Power: < 1%\u003c/li>\n\u003cli>Voltage Range: 9.6 - 16VDC\u003c/li>\n\u003cli>Quiescent Current Draw: < 0.9A\u003c/li>\n\u003cli>Maximum Current Draw: 25A\u003c/li>\n\u003cli>Frequency response: 45Hz-40kHz\u003c/li>\n\u003cli>Signal-to-noise ratio: > 80 dB\u003c/li>\n\u003cli>Cable type: 12AWG\u003c/li>\n\u003cli>Cable length: 12 Feet (3.66m)\u003c/li>\n\u003cli>Bluetooth® version: 5.3\u003c/li>\n\u003cli>Bluetooth® profile: A2DP V1.3, AVRCP V1.6\u003c/li>\n\u003cli>Bluetooth® transmitter frequency range: 2400 MHz – 2483.5 MHz\u003c/li>\n\u003cli>Bluetooth® transmitter power: ≤ 15 dBm (EIRP)\u003c/li>\n\u003cli>Aux-In: 2Vrms(0.35Vrms - 2Vrms), 4Vrms(0.7Vrms - 4Vrms), 6Vrms(1.05Vrms - 6Vrms) (3.5 mm connector)\u003c/li>\n\u003cli>Aux-Out: 2 Vrms (3.5 mm connector)\u003c/li>\n\u003cli>USB format: FAT16, FAT32\u003c/li>\n\u003cli>Soundbar Dimension (L x W x H): 21-5/32" x 5" x 4-5/8" (537.5 x 126.7 x 118mm)\u003c/li>\n\u003cli>Soundbar Weight: 11.46 lbs (5.2kg)\u003c/li>\n\u003cli>Packaging dimensions (W x H x D): 24" x 9" x 7.6" (611 x 229 x 193mm)\u003c/li>\n\u003cli>Gross weight: 17 lbs (7.74 kg)\u003c/li>\n\u003c/ul>\n"