Hornady Unprimed Brass Rifle Cartridge Cases

Item No. 90255-86281
$40.99 - $62.99

Fields marked with * are required.

false

Shipped To You

Please select Caliber and Quantity above

Pick Up At Store

Please select Caliber and Quantity above

Product Description

90255-86281
At Hornady, brass is the foundation for what could be the most memorable shot of your lifetime. Extra time and care is taken in the creation of our cases, producing smaller lots that meet strict quality standards.

Our cases offer reloaders excellent uniformity in wall thickness, weight and internal capacity. We measure for consistently tight wall concentricity and even run our cases through a pressure calibration test to ensure uniform case expansion during firing.

Our cases allow proper seating of the bullet, not only in the case, but in the chamber as well. High quality brass contributes to consistent charges and pressures.
 

*New, unprimed brass. This is not loaded ammunition.

Features:

Tight Wall Concentricity
Concentricity helps to ensure proper bullet seating in both the case and the chamber of your firearm. Higher concentricity also aids in a uniform release of the bullet on firing, for optimal velocity and accuracy.

Uniform Case Wall Thickness
Benchrest shooters have long known that uniform case wall thickness is vital to accuracy. We manufacture to extremely tight tolerances to ensure this critical element is as consistent as possible.

More Reloads Per Case
We treat Hornady brass as the foundation for an accurate cartridge, not a commodity. Because we take greater care in its creation you'll get more reloads from Hornady brass.

Consistent Weight And Capacity
Every single Hornady case, regardless of the lot in which it was produced, is virtually identical to other Hornady cases in the same caliber. For you, this means consistent pressures, velocity and accuracy - every time.

Made In The USA!

Brass Preparation:
With bulk rifle brass you may sometimes notice a few case mouths are "out of round" or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.

With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

Customer Reviews

5.0 / 5.0
19 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
18
1
0
0
0
Rated 5 out of 5
Just what was ordered
May 17, 2021
Purchased
1 month ago
Rated 5 out of 5
Excellent
Fast shipping, no price gouging and as described.
April 6, 2021
Purchased
2 months ago
Rated 5 out of 5
Hornady casings have always served us well..
March 25, 2021
Purchased
3 months ago
Rated 5 out of 5
Great product. Quick shipping! I wish we had Sheets in my part of the country!
March 20, 2021
Purchased
2 months ago
Rated 5 out of 5
The brass was very uniform and was able to start loading without any other processing of brass. The loads I use was also very accurate for cases not Fire form to my rifle. Will order more in the future Thanks
February 26, 2021
Purchased
4 months ago
Rated 5 out of 5
Good brass for the price
I am just a target shooter, I don't compete, but this brass combined with 6.5 Sta-ball and 140g ELDMs produced a 5 shot group size of .44 at 100 yards. All 10 groups shot that day, with this virgin brass were under .6 inches at 100 yards. While I cannot speak to 2nd and third firings yet, and their relative neck tensions, as you can see the brass certainly didn't hold back the accuracy from the load. Shot through a 24" 6.5cm Tikka action with a Bartlein Barrel installed by Crescent Customs in KC.
February 26, 2021
Purchased
4 months ago
Rated 4 out of 5
The cases are fine ...I have not used any as I was primarily looking to stock up in this season of shortages of items of this nature. Hornady has their stamp all over this caliber...the cases should be fine.
February 25, 2021
Purchased
4 months ago
Rated 5 out of 5
Great brass
February 18, 2021
Purchased
4 months ago
Rated 5 out of 5
Easy to get when it's available
Great brass wish you had more
January 5, 2021
Purchased
5 months ago
Rated 5 out of 5
Hornady 300wm brass
Primer pockets hold up well. Has a good life overall have 6+ loadings on some.
December 28, 2020
Purchased
5 months ago