Hornady Premium Match Grade 2-Die Set

90255-545127

Get match-winning performance from your press with Hornady® Match™ Grade dies. Hornady® Match™ Grade Dies give you total control over neck tension in the resizing process. These dies feature the ability to use interchangeable, self-centering neck size bushings that eliminate the chance of over sizing your case necks and overworking the brass. Tight tolerances at the press translate into tighter groups at the range. Released in 2024, the Click-Adjust Bullet Seating Micrometer set a new standard in bullet seating. New for 2025, the Click-Adjust Micrometer will now come factory installed on Hornady Match Grade seating dies.

Notes:
Bushings are sold separately.
Cartridge specific Hornady Match Grade Die Bushing required to complete Match™ Grade Die.
This die set includes a Full-Length Sizing Die and Seating Die with Roll Crimp.
Plastic storage box and two Sure-Loc rings included.
Shellholder sold separately.
Made In United States of America.

Use of Hornady Match Grade Neck and Full Length Dies and Bushings:
Hornady Match Grade dies have a separate, interchangeable neck size bushing (not included with die).
The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
Standard dies size to SAAMI minimum specification and this is often not necessary, as a particular rifle, brass type and chamber may not need minimum dimensions. Less sizing results in less working of the brass.
Using some loaded or dummy cartridges that fit the rifle's chamber without excessive play, measure the diameter of the case neck. Subtract .001" from that diameter and the result should be a reasonable starting point for the correct bushing dimension. Select a size that is at that dimension or just under it.
Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments.

Features:
Sizing die features precision-polished elliptical expander to reduce friction and case-neck stretch.
Seating die features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs.

Specs:
Number of Dies: 2
Die Type: Bushing Full Length Sizing, Bullet Seating
Threads: 7/8"-14
Storage Box Included: Yes
Shell Holder Included: No
Origin: USA

Hornady Match Grade Die Bushing List:
6.5mm .284 Bushing / 594284
6.5mm .285 Bushing / 594285
6.5mm .286 Bushing / 594286
6.5mm .287 Bushing / 594287
6.5mm .288 Bushing / 594288
6.5mm .289 Bushing / 594289
6.5mm .290 Bushing / 594290
6.5mm .291 Bushing / 594291
6.5mm .292 Bushing / 594292
6.5mm .293 Bushing / 594293
7mm .306 Bushing / 594306
7mm .307 Bushing / 594307
7mm .308 Bushing / 594308
7mm .309 Bushing / 594309
7mm .310 Bushing / 594310
7mm .311 Bushing / 594311
7mm .312 Bushing / 594312
7mm .313 Bushing / 594313
7mm .314 Bushing / 594314
7mm .315 Bushing / 594315