This die set includes Full Length Sizer and a Seating Die. The Full Length Die now features a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier to tighten the spindle lock when making incremental adjustments. Die set comes packaged in a plastic storage box with Four Sure-Loc rings. Shell holder is sold separately. 

Full-Length Sizing Die:

• A feature on all full length size dies, the Zip Spindle™ positively locks to eliminate slippage. A series of light threads cut on both the spindle and spindle collet allows incremental adjustments by turning the spindle or it can easily “zip” up or down for larger movements.
• The Hornady Sure-Loc™ lock rings clamp around the entire die applying constant pressure to hold the ring in place. The locking screw tightens the ring without coming into contact with the threads, eliminating possible damage from pliers.
• The Hornady Sure-Loc™ lock rings clamp around the entire die applying constant pressure to hold the ring in place. The locking screw tightens the ring without coming into contact with the threads, eliminating possible damage from pliers.
• Superior to “ball expanders,” this Hornady^® exclusive provides extremely smooth neck sizing and significantly reduces friction and case neck stretch. Internal threading prevents it from pulling loose and the elliptical expander eliminates the need for a separate expander die for necking-up to the next caliber.

• Seater adjustment screw easily adjusts for bullet seating depths. Also has compression lock o-ring that provides the necessary tension to make fine adjustments easier, and keep the die set in place.
• The Hornady Sure-Loc™ lock rings clamp around the entire die applying constant pressure to hold the ring in place. The locking screw tightens the ring without coming into contact with the threads, eliminating possible damage from pliers.
• Locking retainer spring removes in seconds for easy disassembly and cleaning of the die.
• This seating system holds the bullet, the case neck and the seating stem in perfect alignment in the sleeve BEFORE the bullet enters the neck of the case. The system includes a floating bullet alignment sleeve, a floating steel seating stem and a built-in crimper for benchrest precision. Bullets are aligned in the sleeve as they enter the die for optimum seating and enhanced accuracy.
• Built-in Taper Crimper - The built-in crimper gives you the option of crimping without the need for an extra crimp die thus saving a station on your press.

• Hand Polished Interior is guaranteed not to scratch brass.
• Threaded replaceable Expander assembly.
• Elliptical expander reduces case neck friction and stretching, as well as easing the process of necking up brass.
• Hardened steel decapping pin will not bend, crack or break, even when depriming cases with crimped primer pockets.
• Sure-Loc Lock rings with wrench flats lock the dies into position with locking screws that never contact the threads.
• Locking retainer spring removes in seconds for easy disassembly and cleaning of the die.

• Sizing Expanding Die
• Bullet Seater Die With Crimper
• Sure-Loc Rings With Wrench Flats
• Allen Wrench for Locking Rings
• Die box