Little Crow Gunworks WFT Original .308 Win Brass Case Trimmer
20414-WFT308WIN
The WFT Rifle Brass Trimmer was developed as a precision case trimmer, built to last a lifetime. The WFT products trim bottleneck cartridge brass only. Our Case Trimmers are made to work with Full Length Sized Cases. Our case trimmers use a power source that most people already own – a cordless or electric drill. Once adjusted to the user’s preference, it’s simply a matter of chucking it up in a drill and feeding cases in by hand. The razor sharp high-speed cutters and the sealed ball bearing we incorporate into our trimmers produce an extremely smooth cut. In most cases it will only be necessary to slightly chamfer the inner edge of the case mouth. The Original WFT was designed to fit a standard 3/8" drill chuck. Unlike other case trimmers the WFT does not use pilots, the case is supported by the shoulder and body of the case. The Original WFT Comes standard with a 3/8 " High Speed Steel cutter. A pace of 10 cases per minute is pretty easily achieved.
*Manufacturer's Note for Neck Size: Do not use this trimmer if you need a custom chamber fit for a neck size case.
.308 Winchester Case Trimmer Also Trims:
.243 Win.
.260 Rem.
7mm-08 Rem
Specs:
UPC: 421000010392
Part #: WFT-308 Win
Caliber: .308 Winchester
California Residents
Select Delivery Method:Shipping
Little Crow Gunworks WFT Original .308 Win Brass Case Trimmer
20414-WFT308WIN
The WFT Rifle Brass Trimmer was developed as a precision case trimmer, built to last a lifetime. The WFT products trim bottleneck cartridge brass only. Our Case Trimmers are made to work with Full Length Sized Cases. Our case trimmers use a power source that most people already own – a cordless or electric drill. Once adjusted to the user’s preference, it’s simply a matter of chucking it up in a drill and feeding cases in by hand. The razor sharp high-speed cutters and the sealed ball bearing we incorporate into our trimmers produce an extremely smooth cut. In most cases it will only be necessary to slightly chamfer the inner edge of the case mouth. The Original WFT was designed to fit a standard 3/8" drill chuck. Unlike other case trimmers the WFT does not use pilots, the case is supported by the shoulder and body of the case. The Original WFT Comes standard with a 3/8 " High Speed Steel cutter. A pace of 10 cases per minute is pretty easily achieved.
*Manufacturer's Note for Neck Size: Do not use this trimmer if you need a custom chamber fit for a neck size case.
.308 Winchester Case Trimmer Also Trims:
.243 Win.
.260 Rem.
7mm-08 Rem
Specs:
UPC: 421000010392
Part #: WFT-308 Win
Caliber: .308 Winchester
California Residents