Briley chokes are completely made in the USA, with tight tolerances, classic and modern designs, always with the shooter in mind. Spectrum chokes are an upgraded version of the standard extended choke with color coded bands for easy choke identification with a clean custom look. Each constriction is designated by the color of the band, and the band is also clearly laser marked for easy identification. The wrench slots are hidden within the colored spectrum band which also has a small radius at the top both enhancing the look and creating a snag free choke when sliding the gun into a slip. Extended chokes perform better than conventional flush chokes due to the additional length. Extended chokes have more length to gradually taper down from the bore of the barrel to the constriction of the choke causing less pellet deformation which produces a better pattern.

Briley chokes are completely made in the USA, with tight tolerances, classic and modern designs, always with the shooter in mind. Spectrum chokes are an upgraded version of the standard extended choke with color coded bands for easy choke identification with a clean custom look. Each constriction is designated by the color of the band, and the band is also clearly laser marked for easy identification. The wrench slots are hidden within the colored spectrum band which also has a small radius at the top both enhancing the look and creating a snag free choke when sliding the gun into a slip. Extended chokes perform better than conventional flush chokes due to the additional length. Extended chokes have more length to gradually taper down from the bore of the barrel to the constriction of the choke causing less pellet deformation which produces a better pattern. 

Details:

• Minimum gap geometry and high resolution RMS interior finishes gives less pellet deformation; consistently tighter patterns.
• Choke constriction is laser marked, on color-coded band so there is no need to remove choke to verify size.
• Long tube with hidden wrench slots extends beyond the length of the muzzle.
• Knurled grasping band speeds installation and removal.
• Made in the USA.

Gun Models: Browning Invector Plus - Citori (non-725) current 12 & 20 gauge barrels, Winchester SX2, SX3, SX4, Winchester Supreme, Winchester Select Energy, Browning Gold, Browning Silver, Browning Maxis, Browning Cynergy.

*Please Note: Most Browning firearms have a stamp on either the barrel of autos, or the monoblock of over and unders that will state what type of choke the firearms takes.

Size Options:

• Diffusion w/ Rifling (.005"): Lead/Bismuth to Steel/Tungsten Shot Conversion = Skeet. *Helical rifled Diffusion spreader tubes provide a pattern that is more open than cylinder. 
• Cylinder (.000"): Steel/Tungsten Shot Conversion = Skeet.
• Skeet (.005"): Steel/Tungsten Shot Conversion = Improved Cylinder.
• Improved Cylinder (.010"): Steel/Tungsten Shot Conversion = Modified
• Light Modified (.015"): Steel/Tungsten Shot Conversion = Improved Modified
• Modified (.020"): Steel/Tungsten Shot Conversion = Full
• Improved Modified (.025"): Steel/Tungsten Shot Conversion = Extra Full
• Light Full (.030"): Steel/Tungsten Shot Conversion = N/A
• Full (.035"): Steel/Tungsten Shot Conversion = N/A
• Extra Full (.040"): Steel/Tungsten Shot Conversion = N/A

FAQ:
Question: Which choke system did my Browning come with?
Answer: Browning Invector Plus original flush chokes are about 2 ½” long with threads at the bottom.

Question: Can I shoot non-toxic shot through my replacement chokes?
Answer: All Briley replacement chokes up to and including improved modified will handle steel, tungsten, etc. Briley replacement Helix, Plasma, and Titanium chokes are LEAD ONLY. Briley Thin Wall chokes must state FOR STEEL on the side of the choke. If not, then only lead or bismuth shot may be used.