Previously Asked Questions

• How do you set the DK 1 Gopher Trap?

  To set the DK 1 Gopher Trap, follow these steps:

  1. Set the Trap’s Springs: The DK 1 Gopher Trap uses two powerful springs. Hold the trap with the trigger mechanism facing up. Use your thumbs to push the springs back toward the body of the trap, compressing them until they lock into place. There is usually a safety catch or notch that holds the springs.

     • Tip: Wear gloves while handling the trap to avoid transferring human scent and for protection against the powerful springs.
     • Double-check: Ensure the trap is set properly and the trigger mechanism is aligned to catch the gopher.

  2. Prepare the Trigger Mechanism: Gently place the trigger into position. The gopher needs to push or disturb the trigger as it moves through the tunnel for the trap to activate. Adjust if needed to ensure it activates easily.

  3. Check the Mechanism for Smooth Operation: Before placing the trap in the tunnel, test it. Open the trap, then gently push or disturb the trigger mechanism to see if it activates. Ensure the springs snap into position with enough force.

     • Warning: If the trap doesn’t activate properly, check for any misalignment or dirt in the mechanism.

  4. Ensure the Trap is Balanced: The DK 1 Gopher Trap should be evenly balanced to prevent it from tipping over when placed in the tunnel. Make sure the trigger end is not too heavy or leaning.

  5. Test the Sensitivity (Optional): If your trap has adjustable sensitivity, test it by gently pressing on the trigger plate to see how easily it triggers. Adjust if the setting feels too stiff or too loose. This ensures the trap won’t fire accidentally or miss its target.